Specifications for FRP Daylighting Sheet

Specifications for FRP Daylighting Sheet

·         Good tenacity 

·         Bright and clean appearance 

·         Long service life

·         Transmittance loss rate is low

·         Glass Fiber:  high- quality glass fiber, the content no less than 30%

·         Nominal Thickness:1.2mm, 1.5mm,  2.0mm, 2.5mm, 3.0mm

·         Heat Resistance Limit: -40 to +100

·         Light Transmittance: 76%±2% 

·         Anti- ultraviolet Rate: 99.9%

·         Tensile Strength: 100Mpa

·         Flexural Strength: 180Mpa

·         Cracking Elongation Rate: 1.9%

·         Pasture Hardness: ≥50

·         Thermal Expansion Coefficient: 2.2×10 -5 

·         Thermal Conductivity: 0.18w/m° k

·         Warranty:15 years

·         The Technical Standard of High-quality FRP

·         Good tenacity. No cracking phenomenon when driving nails in roof installation

·         Having close combining with color steel plate. Cross-section thickness is uniform. The shape of FRP is consistent with steel plate.

·         Transmittance loss rate is low. No yellowing phenomenon after long term service.

·         Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.

·         Light through FRP assumes scattering shape and gentle.

·         Bright and clean appearance, no distinct air bubble and cracking on FRP.

·         Anti- ultraviolet and anti- chemistry corrosion.

·         Anti- ageing and anti- pulverization.

·         Long service life.